DN tech inspection form and driver's rules/regulations

Info and links about/to Drift Nirvana
User avatar
Yoshi
Site Admin
Posts: 6607
Joined: Thu May 13, 2010 1:25 pm

DN tech inspection form and driver's rules/regulations

Postby Yoshi » Mon Jan 17, 2011 7:41 pm

Here is the general tech form
http://slidewaysonline.com/Downloads/DN ... ection.pdf

Here is the DN rules and regulations for drivers
https://docs.google.com/document/d/1hAD ... sp=sharing

Yes Battery tie downs are in there twice. So you don't forget it!
Image
Status: HG repair. 488wtq though!
crzsteveo
Posts: 1292
Joined: Tue May 25, 2010 8:44 pm

Re: DN tech inspection form

Postby crzsteveo » Mon Jan 17, 2011 7:49 pm

i didnt see much on like body parts....like ive seen drivers drift without their hoods....so if you didnt have a trunk would you still be able to drift as long as everything is taken out of the trunk?so it doenst fly out and hit somebody of course.
User avatar
Yoshi
Site Admin
Posts: 6607
Joined: Thu May 13, 2010 1:25 pm

Re: DN tech inspection form

Postby Yoshi » Mon Jan 17, 2011 7:53 pm

As long as you have everything secure, I think it's ok. David does it lol
Image
Status: HG repair. 488wtq though!
crzsteveo
Posts: 1292
Joined: Tue May 25, 2010 8:44 pm

Re: DN tech inspection form

Postby crzsteveo » Tue Jan 18, 2011 12:16 am

haha alright thanks yoshi
User avatar
240zac
Slideways VIP
Posts: 312
Joined: Tue May 18, 2010 11:37 pm
Location: fairfax, va
Contact:

Re: DN tech inspection form

Postby 240zac » Tue Jan 18, 2011 3:40 am

i have a question about roll bars for verts.

what do they look for on them? i know it needs to be a 4 point but how in depth do they look into it? is it as long as there is one in my car am i good?


i guess my all in one question is.. is there a rule sheet for said roll bars? i have a main hoop to make one for my car, i just have to get the rest of the piping and make it... i wanna get some rules before i start bending and notching so i know i wont have to re do anythin
Image
User avatar
Yoshi
Site Admin
Posts: 6607
Joined: Thu May 13, 2010 1:25 pm

Re: DN tech inspection form

Postby Yoshi » Tue Jan 18, 2011 3:49 am

They go by the broom handle rule. As long as you aren't tandeming, they aren't too strict about it. I mean, my autopower passes tandem spec and it's a bolt in.
Image
Status: HG repair. 488wtq though!
User avatar
240zac
Slideways VIP
Posts: 312
Joined: Tue May 18, 2010 11:37 pm
Location: fairfax, va
Contact:

Re: DN tech inspection form

Postby 240zac » Tue Jan 18, 2011 3:53 am

what is the broom handle rule?

iwhen i am ready to tandem i'll completely redo everything so i guess i will do the roll bar how i see best works for my vert and for safety
Image
User avatar
Yoshi
Site Admin
Posts: 6607
Joined: Thu May 13, 2010 1:25 pm

Re: DN tech inspection form

Postby Yoshi » Tue Jan 18, 2011 3:58 am

need to have the space of a broom handle above your head. It prevents you from smashing into it in an impact.
Image
Status: HG repair. 488wtq though!
User avatar
240zac
Slideways VIP
Posts: 312
Joined: Tue May 18, 2010 11:37 pm
Location: fairfax, va
Contact:

Re: DN tech inspection form

Postby 240zac » Tue Jan 18, 2011 3:59 am

oh ok.... that shouldnt be too hard.... i think... im a big guy in a little car

broom handle thickness from the very top of the hoop or the bottom of the horizontal part of the hoop?
Image
User avatar
Yoshi
Site Admin
Posts: 6607
Joined: Thu May 13, 2010 1:25 pm

Re: DN tech inspection form

Postby Yoshi » Tue Jan 18, 2011 2:12 pm

I should be able to fit a broom handle between your head and the bar. IE i should see day light without the broom.

so yea top of your head to bottom of the bar.
Image
Status: HG repair. 488wtq though!

Return to “Drift Nirvana”

Who is online

Users browsing this forum: No registered users and 1 guest